Canon Pixma TS307 Install

First Time Setting Up Canon Pixma TS307 Install

  1. First and foremost, you should place your printer at a convenient location that is within the network range of your router for Canon Pixma TS307 Printer setup. Additionally, it should be close enough to your computer for connecting it through a USB cable. 
  2. Now, plug in the printer’s power cable to a power socket and turn it on.
  3. Then, make sure that the printer’s power lamp is properly lit.
  4. Next, you must locate the printer’s “Wireless” button. It is an easily identifiable push button with the wireless icon.
  5. Thereafter, press and hold the “Wireless” button till you get signal from the indicator light which is located next to the button. It must blink once. Hence, release the button as it blinks.
  6. As a result, the “Indicator Light” must turn blue.
  7. Once it does, you should press and hold the “WPS” button on your router within two minutes.
  8. Consequently, you will notice that your printer’s indicator lamp blinks continuously. This indicates that the printer is trying to locate an available network within range.
  9. Simultaneously, the “Power Lamp” will start blinking. Hence, wait till both the lamps stop blinking, but remains lit up. During this process, printer locates and connects to the network.
  10. Thereafter,  it connects your Canon Pixma TS307 Printer securely to your home network. 
  11. Now, you must run the print test to ensure that your Canon Pixma TS307 Printer is connected to the right network.
  12. Therefore, you should load your printer properly with A4 size plain paper.
  13. Next, locate the “Resume” button on your printer. Then, press and hold it.
  14. Consequently, the “Indicator Lamp” besides the button will blink for fifteen times.
  15. Hence, you must keep track of the indicator lamp’s signals. In short, count it accurately. Then, release the “Resume” button after the “Indicator Lamp” blinks for fifteen times.
  16. As a result, Canon Pixma TS307 Printer will print the sheet with network information.
  17. Now, cross-check the details on this sheet very carefully. The SSID on it should display the right name of your home network. 
  18. After confirming the details on this printed sheet, you can start using your printer.
  19. However, before proceeding further, you must download and Install the Driver software on your computer for configuring your printer.
  20. Therefore, you should turn on your computer. Then, connect it to the same network with which your printer is connected.
  21. Next, you should open your preferred internet browser on your computer.
  22. Then, go to the canon’s official website i.e.
  23. Now, follow the “Setup” link on the website by clicking the “Setup” tab.
  24. Subsequently, follow the onscreen instructions and prompts carefully to get the Setup file downloaded on your system.
  25. It will take you to the Product Selection screen. Hence, you must type Canon Pixma TS307 Printer in the box near the top. Then, click “Go”.
  26. Thereafter, it will prompt you to Select “Your Region”. Hence, specify it correctly.
  27. Consequently, it will redirect you to the next page with the “Download” link. Click on the “Download” tab. As a result, the “Setup file” will start downloading on your computer.
  28. Now, it may prompt you to specify a “Save” location for the downloaded file. Therefore, click on “Save” or “Save As”. Then, provide a preferred location.
  29. Finally, wait for the download to complete. It might take several minutes for Canon Pixma TS307 Printer setup. 
  30. Next, you have to install the “Driver” software on your device. For this, turn off the printer for initial steps.
  31. Then, connect your Canon Pixma TS307 Printer to the computer using a USB cable. You usually get a USB cable along with the printer. However, if it doesn’t come with the printer. Then, you can easily purchase it from the market.
  32. Now, connect the printer to a power source and turn it on. Then, confirm that the power lamp is properly lit.
  33. Thereafter, locate the “Start Menu” on your computer. It can be easily found by looking for a Windows icon tab at the lower-left corner of your monitor. Now, click the Windows icon to open the Start Menu. 
  34. Here, click on “Control Panel” from the right-hand section to open it.
  35. Then, click on “Hardware and Sound” tab under the Control Panel.
  36. As a result, the next window will display a list of options. Here, you should click on “Devices and Printer” to open it.
  37. Under “Devices and Printer” window, click the “Add a Printer” tab.
  38. Consequently, the next window will display a list of printers available for setup. Browse the list to choose your Printer. You can identify the correct printer through the port it uses to connect to your computer.
  39. As such, click on the correct port.
  40. On the subsequent window, select “Canon” followed by the model name i.e. Pixma TS307. Thereafter, click on “Next”. 
  41. Next screen will ask you to decide if you want to share the printer or not. Click “Next” after making the desired choice.
  42. At last, Canon Pixma TS307 Printer is ready for use. You can run a print test to confirm the same.
pixma ts307
facing problem with printer
tell us your issue
call us